• Dezhou TaLi New Materials Technology Co., Ltd
CNC deep hole drilling machine,CNC deep hole boring machine,CNC deep hole honing machine,CNC deep hole gun drilling machine,BTA deep hole drilling head, Dezhou TaLi Machinery Equipment Co.,Ltd.,tali,
T22100-3000 mm  CNC Deep Hole Drilling and Boring Machine

T22100-3000 mm CNC Deep Hole Drilling and Boring Machine

Production Characteristics

The T22100/T22200 heavy duty deep hole boring machine is specially desinged by our company ,Its boring diameter range is φ320 mm-φ1000mm and its maximum boring depth is 20000 mm.  it’s based on the characteristics for large , heavy workpiece and the market requirement . This machine is specially for processing heavy duty cylindrical workpiece , the machine body with good rigidity and keep good precision, the spindle adopt the third shifts with sleepless speed regulation (high, neutral, low),in widely speed range, the feeding system by a high-power AC servo motor drive,which meets the different processing demands . The oil feeder clamps the workpiece by mechaincal device ,which is very safe and reliable , The machine can proforma boring if heavy duty components in a large diameter .When boring, the cutting liquid is supplied to cutting gear through boring bar , the chip is discharge forward to the headstock end





When trepanning , the external chip removal model is used , and the special tool, tool bar and clamping device should be equipment . The machine consist of bed body, headstock , oil feeder , feed system , steady rest ,workpiece support ,boring bar support, feed carriage , cooling system, hydraulic system and electric system , etc


Specification For T22100/T2200
NoTechology  specification Technical parameters
T22100T2200
1Drilling hole diameter range Φ320mm-Φ1000mm  Φ320mm-Φ2000mm        
2Borning hoe diameter range100mm-20000mm        100mm-20000mm      
3Workpiece clamping diameter range 500mm-1350m500mm-2100m
4Guideway width1250mm1600mm
5Machine Spindle center height1000mm1300mm
6 Rotation speed range of headstock spindle 3-120r/min                                  (3 Gearshift stepsleep )0.8-80r/min                                (3 Gearshift stepsleep )
7Headstock spindle hole diameterΦ130Φ130
8Spindle front taper hole 140#  Metric140#  Metric
9Headstock motor power 75KW DC motor 75KW DC motor
10Feed speed range 0.5-450mm/min stepsleep0.5-450mm/min stepsleep
11Feeding carrige rapid speed 2000m/min500m/min
12Feed motor power 36.N.m98.N.m
13Feed carriage rapid motor power 7.5KW7.5KW
14Hydraulic pump motor power N=1.5KWN=1.5KW
15Rated work pressure of hydraulic system6.3Mpa6.3Mpa
16Cooling pump motor power N=11KW(3groups )N=11KW(3 groups )
17Cooling system rated pressure2.5Mpa2.5Mpa
18Cooling system flow100.400.700L/min100.400.700L/min
19Rate work pressure of cooling system2.5Mpa2.5Mpa
20Cooling system flow300.600.900l/min300.600.900l/min
21CNC operation system Germany Siemens 808  or KND